Info: 'You are faxing your registration form to Pancomm. Normally, you should print the form on your printer and mail it with the registration fee. If you are using a credit card, you can continue though it is best to send the form via email.'
DITL_475.txt
Items: (3 entries)
0:
Bounds: x1=170, y1=166, x2=250, y2=186
Type: 4
Info: 'Continue'
1:
Bounds: x1=320, y1=166, x2=384, y2=186
Type: 4
Info: 'Cancel'
2:
Bounds: x1=60, y1=20, x2=400, y2=158
Type: -120
Info: 'You are sending a fax to Pancomm. Please include your email address or your postal mailing address. We will not be able to respond if you only give your common voice and fax number.'
DITL_470.txt
Items: (4 entries)
0:
Bounds: x1=320, y1=166, x2=384, y2=186
Type: 4
Info: 'Cancel'
1:
Bounds: x1=170, y1=166, x2=250, y2=186
Type: 4
Info: 'Continue'
2:
Bounds: x1=60, y1=20, x2=400, y2=118
Type: -120
Info: 'The XON/XOFF flow control command you are using ^0 is not accepted by the modem. Your fax may not be sent correctly. You should cancel and refer to your modem manual to find the correct command. Then use 'ValueFax Manager' to enter the '
3:
Bounds: x1=60, y1=118, x2=400, y2=155
Type: -120
Info: 'correct command in the 'Modem Commands…' dialog under the 'setup' menu.'
DITL_465.txt
Items: (3 entries)
0:
Bounds: x1=317, y1=223, x2=375, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=38, x2=407, y2=120
Type: -120
Info: 'You have already sent 20 faxes using an unregistered ValueFax product. You cannot send any more until you register the product.Please register and support shareware.'
2:
Bounds: x1=96, y1=120, x2=407, y2=200
Type: -120
Info: 'If you are going to be using this product, you should register it using the 'ValueFax Registration' program in the 'ValueFax 2.0.15' Folder on your hard disk.'
DITL_460.txt
Items: (3 entries)
0:
Bounds: x1=317, y1=223, x2=375, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=38, x2=407, y2=120
Type: -120
Info: 'This is your 20th fax using an unregistered ValueFax product. This is the last fax you can send until you register the product.'
2:
Bounds: x1=96, y1=120, x2=407, y2=200
Type: -120
Info: 'If you are going to be using this product, you should register it using the 'ValueFax Registration' program in the 'ValueFax 2.0.15' Folder on your hard disk.'
DITL_455.txt
Items: (3 entries)
0:
Bounds: x1=317, y1=223, x2=375, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=38, x2=407, y2=120
Type: -120
Info: 'This is your ^0th fax using an unregistered ValueFax product. I see you have run the registration program. Please send in the registration form with the fee if you have not already done so. '
2:
Bounds: x1=96, y1=120, x2=407, y2=200
Type: -120
Info: 'You can send only 20 faxes if you do not register. Hurry, it can take several weeks to for your cheque to clear. We depend on your registration fee for enhancements to this product.'
DITL_450.txt
Items: (3 entries)
0:
Bounds: x1=317, y1=223, x2=375, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=38, x2=407, y2=120
Type: -120
Info: 'This is your ^0th fax using an unregistered ValueFax product. If you are going to be using this product, you should register it using the 'ValueFax Registration' program in the 'ValueFax 2.0.15' folder on your hard disk.'
2:
Bounds: x1=96, y1=120, x2=407, y2=220
Type: -120
Info: 'You can send only 20 faxes if you do not register. Hurry, it can take several weeks to for your cheque to clear. We have spent many years developing this product and we request you to please register the product and support shareware.'
DITL_355.txt
Items: (3 entries)
0:
Bounds: x1=265, y1=93, x2=323, y2=113
Type: 4
Info: 'Replace'
1:
Bounds: x1=187, y1=93, x2=245, y2=113
Type: 4
Info: 'Cancel'
2:
Bounds: x1=65, y1=30, x2=395, y2=80
Type: -120
Info: 'Attachment '^0' already exists.'
DITL_350.txt
Items: (3 entries)
0:
Bounds: x1=230, y1=90, x2=290, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=160, y1=90, x2=220, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=15, x2=320, y2=80
Type: -120
Info: 'Fax transmission was unsuccessful.Retry again?'
DITL_345.txt
Items: (3 entries)
0:
Bounds: x1=280, y1=110, x2=340, y2=130
Type: 4
Info: 'OK'
1:
Bounds: x1=200, y1=110, x2=260, y2=130
Type: 4
Info: 'Cancel'
2:
Bounds: x1=60, y1=10, x2=340, y2=100
Type: -120
Info: 'Dial the number of the fax machine and click OK when the fax machine answers and you hear the fax tone.'
DITL_340.txt
Items: (2 entries)
0:
Bounds: x1=280, y1=150, x2=340, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=10, x2=340, y2=140
Type: -120
Info: 'Fax has been spooled in background. However, the background program is not running. This fax will be sent when the Mac is restarted and the ValueFax background program begins to run'
DITL_335.txt
Items: (4 entries)
0:
Bounds: x1=230, y1=90, x2=290, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=160, y1=90, x2=220, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=90, x2=150, y2=110
Type: 4
Info: 'Spool in background'
3:
Bounds: x1=70, y1=15, x2=320, y2=80
Type: -120
Info: 'Fax transmission was unsuccessful.Retry again?'
DITL_330.txt
Items: (3 entries)
0:
Bounds: x1=180, y1=100, x2=280, y2=120
Type: 4
Info: 'Send anyway'
1:
Bounds: x1=70, y1=100, x2=160, y2=120
Type: 4
Info: 'Cancel fax'
2:
Bounds: x1=60, y1=10, x2=280, y2=90
Type: -120
Info: 'This fax image is too big and it is being truncated. Please use Normal mode or send as two pages.'
DITL_325.txt
Items: (2 entries)
0:
Bounds: x1=220, y1=100, x2=280, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=10, x2=280, y2=90
Type: -120
Info: 'Cannot open file ^0. Please quit the ValueFax Manager and try again.'
DITL_320.txt
Items: (3 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'Yes'
1:
Bounds: x1=70, y1=90, x2=140, y2=110
Type: 4
Info: 'Send now'
2:
Bounds: x1=60, y1=15, x2=230, y2=80
Type: -120
Info: 'It is already past the selected time. Should the fax be sent tomorrow?'
DITL_313.txt
Items: (2 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=230, y2=70
Type: -120
Info: 'Please do a Page Setup for this document before sending it via fax.'
DITL_312.txt
Items: (2 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=230, y2=70
Type: -120
Info: 'This modem is not compatible with this ValueFax software. Please check the modem.'
DITL_311.txt
Items: (2 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=230, y2=70
Type: -120
Info: 'This recipient name is already in use. Please type in another name.'
DITL_302.txt
Items: (2 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=230, y2=80
Type: -120
Info: 'Cannot enter any more new numbers. Please press cancel and issue the print command again'
DITL_301.txt
Items: (2 entries)
0:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=230, y2=70
Type: -120
Info: 'Please provide a name and/or number for the recipient.'
DITL_300_install done.txt
Items: (5 entries)
0:
Bounds: x1=300, y1=220, x2=420, y2=240
Type: 4
Info: 'I will restart later'
1:
Bounds: x1=60, y1=20, x2=429, y2=89
Type: -120
Info: 'Congratulations! ValueFax installation is complete. Please refer to the "ValueFax Users Guide" installed in the "ValueFax Files" folder on your main disk for further configuration information.'
2:
Bounds: x1=60, y1=90, x2=427, y2=160
Type: -120
Info: 'If there was any problem with the fax transmission, please send an email to valuefax@ix.netcom.com and include the text file xmitdebug from the "ValueFax Fax folder" inside the system folder.'
3:
Bounds: x1=182, y1=221, x2=240, y2=241
Type: 4
Info: 'Restart'
4:
Bounds: x1=60, y1=161, x2=427, y2=197
Type: -120
Info: 'You should restart now to enable ValueFax to receive faxes and to send QuickFaxes.'
DITL_265_commands OK.txt
Items: (2 entries)
0:
Bounds: x1=275, y1=145, x2=335, y2=165
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=360, y2=140
Type: -120
Info: 'The modem commands you have selected appear to be accepted by your modem.'
DITL_264_test fax.txt
Items: (5 entries)
0:
Bounds: x1=345, y1=265, x2=440, y2=285
Type: 4
Info: 'Send test fax '
1:
Bounds: x1=265, y1=265, x2=325, y2=285
Type: 4
Info: 'Back'
2:
Bounds: x1=20, y1=10, x2=400, y2=85
Type: -120
Info: 'We will now attempt to send a text fax to verify that all the settings are correct. Please enter a fax number to send a test fax. Enter the full fax number that you will need to dial including the 1+area code if not local.'
3:
Bounds: x1=23, y1=153, x2=352, y2=172
Type: 16
Info: '(408)865-0110 '
4:
Bounds: x1=18, y1=200, x2=436, y2=233
Type: -120
Info: 'ValueFax will dial this number as:^0'
DITL_263_dialing options.txt
Items: (6 entries)
0:
Bounds: x1=345, y1=265, x2=405, y2=285
Type: 4
Info: 'Next'
1:
Bounds: x1=265, y1=265, x2=325, y2=285
Type: 4
Info: 'Back'
2:
Bounds: x1=73, y1=158, x2=362, y2=172
Type: 16
Info: ''
3:
Bounds: x1=73, y1=213, x2=362, y2=227
Type: 16
Info: ''
4:
Bounds: x1=205, y1=25, x2=492, y2=56
Type: 7
Info: ' Ö'
5:
Bounds: x1=15, y1=25, x2=200, y2=56
Type: 7
Info: ' Ö'
DITL_262_no fax modem.txt
Items: (3 entries)
0:
Bounds: x1=240, y1=165, x2=300, y2=185
Type: 4
Info: 'OK'
1:
Bounds: x1=60, y1=20, x2=347, y2=105
Type: -120
Info: 'Your modem does not seem to support fax capability. Try turning it OFF and ON again and make sure it is a fax modem. Please send an email to valuefax@ix.netcom.com and let us know the modem's model number. '
2:
Bounds: x1=60, y1=105, x2=347, y2=153
Type: -120
Info: 'Also, please email us the text file "xmitdebug" from the "ValueFax Fax Folder" inside your system folder.'
DITL_261_bad reset command.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=188, x2=354, y2=208
Type: 4
Info: 'OK'
1:
Bounds: x1=71, y1=50, x2=346, y2=180
Type: -120
Info: 'The modem reset command you have specified:^0is not accepted by your modem. Please recheck your modem manual and reenter this command.'
DITL_260_bad flow control command.txt
Items: (2 entries)
0:
Bounds: x1=265, y1=185, x2=325, y2=205
Type: 4
Info: 'OK'
1:
Bounds: x1=61, y1=20, x2=342, y2=163
Type: -120
Info: 'The modem XON/XOFF flow control command you have specified:^0is not accepted by your modem. Please recheck your modem manual and reenter this command.'
DITL_259_Coverpage Info.txt
Items: (8 entries)
0:
Bounds: x1=364, y1=292, x2=424, y2=312
Type: 4
Info: 'Next'
1:
Bounds: x1=284, y1=292, x2=344, y2=312
Type: 4
Info: 'Back'
2:
Bounds: x1=68, y1=53, x2=392, y2=67
Type: 16
Info: ''
3:
Bounds: x1=68, y1=108, x2=392, y2=122
Type: 16
Info: ''
4:
Bounds: x1=68, y1=163, x2=392, y2=177
Type: 16
Info: '(408) 555-1212'
5:
Bounds: x1=68, y1=213, x2=392, y2=227
Type: 16
Info: '(408) 555-2222'
6:
Bounds: x1=20, y1=243, x2=464, y2=258
Type: -120
Info: 'Your complete email address, for example, valuefax@ix.netcom.com'
7:
Bounds: x1=65, y1=269, x2=389, y2=283
Type: 16
Info: ''
DITL_258_Modem Commands.txt
Items: (5 entries)
0:
Bounds: x1=345, y1=265, x2=405, y2=285
Type: 4
Info: 'Next'
1:
Bounds: x1=65, y1=265, x2=145, y2=285
Type: 4
Info: 'Test'
2:
Bounds: x1=265, y1=265, x2=325, y2=285
Type: 4
Info: 'Back'
3:
Bounds: x1=33, y1=213, x2=362, y2=227
Type: 16
Info: 'AT&F'
4:
Bounds: x1=33, y1=123, x2=362, y2=137
Type: 16
Info: 'AT&K4&D2&C1 '
DITL_257_Modem Test Results.txt
Items: (4 entries)
0:
Bounds: x1=345, y1=265, x2=405, y2=285
Type: 4
Info: 'Next'
1:
Bounds: x1=265, y1=265, x2=325, y2=285
Type: 4
Info: 'Back'
2:
Bounds: x1=20, y1=155, x2=388, y2=175
Type: 7
Info: ' Ö'
3:
Bounds: x1=65, y1=115, x2=224, y2=135
Type: 7
Info: ' Ö'
DITL_256_ValueFax Installer Wizard.txt
Items: (2 entries)
0:
Bounds: x1=345, y1=265, x2=405, y2=285
Type: 4
Info: 'Test'
1:
Bounds: x1=20, y1=5, x2=415, y2=55
Type: -120
Info: 'We will begin by testing your modem so we can install the proper class of ValueFax software and setup the correct modem flow control commands. '
DITL_128.txt
Items: (2 entries)
0:
Bounds: x1=249, y1=203, x2=307, y2=223
Type: 4
Info: 'OK'
1:
Bounds: x1=91, y1=6, x2=344, y2=174
Type: -120
Info: 'You are using the Printer-Modem port. If that same port is also used for AppleTalk, please make sure AppleTalk is turned off in the Chooser. You can rerun the Installer Wizard again once AppleTalk is off.'
DITL_-4068_Background is active.txt
Items: (2 entries)
0:
Bounds: x1=20, y1=90, x2=80, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=10, x2=330, y2=70
Type: 8
Info: 'The background program is busy.Please try again in a few minutes'
DITL_-4070_out of memory warning.txt
Items: (5 entries)
0:
Bounds: x1=223, y1=232, x2=281, y2=252
Type: 4
Info: 'OK'
1:
Bounds: x1=109, y1=232, x2=167, y2=252
Type: 4
Info: 'Cancel'
2:
Bounds: x1=90, y1=7, x2=350, y2=88
Type: -120
Info: 'This fax conversion may run out of Application memory. Please click Cancel and increase the application's partition if you have the memory and try again. '
3:
Bounds: x1=90, y1=90, x2=350, y2=158
Type: 8
Info: 'To increase the application's partition, Quit from the application, do a Get Info on the application and enter a larger number in the box. If no more memory '
4:
Bounds: x1=90, y1=153, x2=350, y2=223
Type: -120
Info: 'is available in your Mac, click OK and continue anyway. The fax will probably be OK unless it contains very complex graphics.'
DITL_-4071_Cannot write.txt
Items: (2 entries)
0:
Bounds: x1=137, y1=90, x2=197, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=21, y1=45, x2=308, y2=80
Type: 8
Info: 'Error ^0 writing file. Disk may be full.'
DITL_-4073_Modem not found.txt
Items: (2 entries)
0:
Bounds: x1=137, y1=90, x2=197, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=21, y1=45, x2=308, y2=80
Type: 8
Info: 'ValueFax modem not connected or not powered on. Please inspect and try again.'
DITL_-4075_Background is busy.txt
Items: (3 entries)
0:
Bounds: x1=20, y1=90, x2=160, y2=110
Type: 4
Info: 'Spool in Background'
1:
Bounds: x1=170, y1=90, x2=230, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=80, y1=10, x2=330, y2=70
Type: 8
Info: 'The background program is busy.Please spool the fax orcancel and try again in a few minutes'
DITL_-4077_No phone number.txt
Items: (2 entries)
0:
Bounds: x1=137, y1=90, x2=197, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=26, x2=308, y2=76
Type: 8
Info: 'Please select at least one phone number or a list'
DITL_-4078_Out of memory.txt
Items: (2 entries)
0:
Bounds: x1=121, y1=139, x2=181, y2=159
Type: 4
Info: 'OK'
1:
Bounds: x1=11, y1=54, x2=294, y2=125
Type: 8
Info: 'Out of Application memory. Please increase the application's partition and try again.'
DITL_-4079_Modem Reset String Mismatch.txt
Items: (4 entries)
0:
Bounds: x1=223, y1=232, x2=281, y2=252
Type: 4
Info: 'Yes'
1:
Bounds: x1=109, y1=232, x2=167, y2=252
Type: 4
Info: 'No'
2:
Bounds: x1=90, y1=7, x2=400, y2=88
Type: -120
Info: 'The existing setup file in the ValueFax Fax Folder inside the system folder contains the modem reset string ^0'
3:
Bounds: x1=90, y1=90, x2=400, y2=225
Type: -120
Info: 'The modem you specified in the previous step would normally need ^1Continue to use the existing modem reset string? '
DITL_-4080_Modem XON_XOFF String Mismatch.txt
Items: (4 entries)
0:
Bounds: x1=223, y1=232, x2=281, y2=252
Type: 4
Info: 'Yes'
1:
Bounds: x1=109, y1=232, x2=167, y2=252
Type: 4
Info: 'No'
2:
Bounds: x1=90, y1=7, x2=400, y2=88
Type: -120
Info: 'The existing setup file in the ValueFax Fax Folder inside the system folder contains the modem XON/XOFF string ^0'
3:
Bounds: x1=90, y1=90, x2=400, y2=225
Type: -120
Info: 'The modem you specified in the previous step would normally need ^1Continue to use the existing modem XON/XOFF string? '
DITL_-8180_Coverpage Message.txt
Items: (4 entries)
0:
Bounds: x1=300, y1=250, x2=358, y2=270
Type: 4
Info: 'Done'
1:
Bounds: x1=170, y1=250, x2=257, y2=270
Type: 4
Info: 'No Message'
2:
Bounds: x1=130, y1=10, x2=272, y2=26
Type: -120
Info: 'Coverpage Message'
3:
Bounds: x1=20, y1=40, x2=420, y2=230
Type: 16
Info: ''
DITL_-8181.txt
Items: (4 entries)
0:
Bounds: x1=232, y1=80, x2=290, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=144, y1=80, x2=202, y2=100
Type: 4
Info: 'Cancel'
2:
Bounds: x1=13, y1=9, x2=215, y2=25
Type: -120
Info: 'Name of this attachment:'
3:
Bounds: x1=13, y1=38, x2=305, y2=56
Type: 16
Info: '12345678901234567890123456789012'
DITL_-8182.txt
Items: (4 entries)
0:
Bounds: x1=326, y1=166, x2=384, y2=186
Type: 4
Info: 'OK'
1:
Bounds: x1=170, y1=167, x2=293, y2=186
Type: 4
Info: 'No Attachments'
2:
Bounds: x1=100, y1=10, x2=335, y2=26
Type: -120
Info: 'Select one or more attachments'
3:
Bounds: x1=40, y1=40, x2=380, y2=150
Type: 0
Info: ''
DITL_-8188_new number info.txt
Items: (14 entries)
0:
Bounds: x1=258, y1=205, x2=318, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=180, y1=205, x2=240, y2=225
Type: 4
Info: 'Cancel'
2:
Bounds: x1=348, y1=205, x2=408, y2=225
Type: 4
Info: 'Next'
3:
Bounds: x1=84, y1=31, x2=387, y2=47
Type: 16
Info: ''
4:
Bounds: x1=84, y1=57, x2=387, y2=73
Type: 16
Info: ''
5:
Bounds: x1=105, y1=86, x2=386, y2=100
Type: 16
Info: ''
6:
Bounds: x1=10, y1=130, x2=357, y2=146
Type: 5
Info: 'dial 1 before number even in same area code'
7:
Bounds: x1=8, y1=30, x2=66, y2=46
Type: -120
Info: 'Name'
8:
Bounds: x1=8, y1=49, x2=79, y2=66
Type: -120
Info: 'Company'
9:
Bounds: x1=8, y1=86, x2=89, y2=103
Type: -120
Info: 'Fax number'
10:
Bounds: x1=97, y1=5, x2=394, y2=21
Type: -120
Info: 'Enter information for new fax number'
11:
Bounds: x1=10, y1=155, x2=161, y2=173
Type: 5
Info: 'Temporary Number'
12:
Bounds: x1=10, y1=175, x2=360, y2=193
Type: 5
Info: 'This number can receive Normal mode faxes only'